File Name: different types of fuses and their uses .zip
- Fuse and Types of Fuses – Construction, Operation & Applications
- Types of Fuses
- What is Fuse : Different Types and Its Applications
- Electrical Fuse Types
Search for the part s number you wish to receive samples. Or, visit the sample center page. Automotive Fuse Link Definition and Specifications Automotive use links are self-acting break appliances for the protection of electrical devices against unsuitable current loads.
Fuse and Types of Fuses – Construction, Operation & Applications
Fuses can be considered as a sacrificial element in the circuit as they act as a weak link in the entire circuit. This is because, a fuse scarifies itself and reliably opens the circuit when there is an excessive current in the circuit or the circuit is under over load and if there is any short circuit. The principle of a fuse is based on the heating effect of the electric current. A simple fuse consists of a small conductive material with low resistance and it is placed in series with the circuit. The cross section area of this conducting material is designed such that it allows a certain amount of current that is permitted to flow in the circuit. When the current in the circuit exceeds this permitted value which may be caused due to overload, short circuit or load mismatch , this excessive current will melt the conductive element in the fuse and opens the circuit.
Basically, use 3 type of fuse 1. Rewirable or Kit-kat fuse 2. Cartridge fuse 3. Switch Fuse. Electrical Fuse Types. Fuse is a piece of wire of a material with a very low melting point.
Electric fuse was invented by Thomas Alva Edison in There are many types of fuses, but the function of all these fuses is the same. In this article, we will discuss the different types of fuses, its construction, working and operation and their application in various electronics and electrical systems. Related Posts:. A general Fuse consists of a low resistance metallic wire enclosed in a non combustible material.
Types of Fuses
Skip to search form Skip to main content You are currently offline. Some features of the site may not work correctly. DOI: This paper deals with the brief review of the concept and functioning of different types of fuses with a main focus on analysis of the protection available by fuses from short-circuit damages. View via Publisher. Save to Library.
What is Fuse : Different Types and Its Applications
The fuse is the current interrupting devices which break or open the circuit by fusing the element and thus remove the faulty device from the main supply circuit. The fuses are mainly classified into two types, depends on the input supply voltages they are the AC fuses and the DC fuses. The different types of the fuses are shown in the image below.
Electrical Fuse Types
He was the person who suggested the utilization of reduced part of conductors to guard telegraph stations against the hits of lighting with liquefying, the slighter wires would guard equipment along with wiring in the building. In the year , lighting installations and telegraph cables can be protected by employing a variety of foil fusible essentials and wires. At the end, Thomas Alva Edison earned rights for a fuse which is an element of his electric distribution system in the year And now, this article discusses fuse , types of fuses, and its applications in various fields. In the field of electronics or electrical, a fuse is considered as the most crucial device which is employed in various electrical circuits that give protection from the overcurrent conditions. The device is included with a metal strip where it gets dissolved when there is a flow of an extended range of current values. Because of the metal dissolving, the circuit becomes an open circuit and disconnects the flow of power supply through the device.
In electronics and electrical engineering , a fuse is an electrical safety device that operates to provide overcurrent protection of an electrical circuit. Its essential component is a metal wire or strip that melts when too much current flows through it, thereby stopping or interrupting the current. It is a sacrificial device ; once a fuse has operated it is an open circuit, and must be replaced or rewired, depending on its type.
There are different variants of fuse boxes available with different types of circuit breaking. For instance, in the case of slow blow fuses, a small overload is carried.
A fuse is probably the simplest electrical device, but its function is critical in protecting electrical circuits from damage. Fuses are found in every circuit in one form or another in various shapes, sizes, and ratings. In this article, we will learn how a fuse works and about the different types of the fuse.
Fuses are the protectors, these are the safety devices which are used to protect the home appliances like televisions, refrigerators, computers with damage by high voltage. The fuse is made up of thin strip or strand of metal, whenever the heavy amount of current or an excessive current flow is there in an electrical circuit, the fuse melts and it opens the circuit and disconnects it from the power supply. Also, it works as a circuit breaker or stabilizer which protects the device from damage.